Reversible Hydraulic Motors ø52 Standard German BH FLANGE – Group 2

Reversible hydraulic motor in aluminium, and with external gears, German standard.
It is a component of group 2 and of type BH, according to our product classification for the application of screws. In the following/adjacent figure, you will find a diagram showing where the empty holes for the fixing screws are located on BH models.

Features and functions

The flange of this model has a diameter of 52 mm. Reversible products are used for some special applications and their rotation verse is alternately clockwise and counterclockwise. Therefore, if you are looking for a motor that must work in a single rotation verse clockwise or counterclockwise (possibly to be reversed according to your needs before mounting the product in the application), we recommend our hydraulic unidirectional motors, whose rotation verse can be changed without adding any components: go to the page of unidirectional motors of group 2.
This model is also available with cast iron flange.

Characteristic Curves

 Download the file xmcc2.pdf ~43 KB

Technical Data

  • Displacements from 4.2 cm3/rev to 39.6 cm3/rev
  • Maximum pressures up to 300 bar
  • Rotation speeds up to 3500 rpm

Options available

  • Viton
  • Inlet and outlet in the body, front flange or back cover
  • Internal drain
  • Available shafts:
    • Milled shaft
    • Splined shaft

In the following tables you will find the most common versions of this product in STEP format. For other configurations please contact our technical office.

Configurations

Elements

We are here to help you

Do you have any questions or need more information on the type of accessory to apply to your Vivoil pump, motor or flow divider? For any question or request please write or call us.