Standard reversible hydraulic motor in aluminium and with external gears. It is a component of group 0.
Features and functions
The flange of this model has a diameter of 22 mm. Reversible products are used for some special applications and their rotation verse is alternately clockwise and counterclockwise. Therefore, if you are looking for a motor that must work in a single rotation verse clockwise or counterclockwise (possibly to be reversed according to your needs before mounting the product in the application), we recommend our hydraulic unidirectional motors, whose rotation verse can be changed without adding any components: go to the page of unidirectional motors of group 0.
Characteristic CurvesDownload the file xmcc0.pdf $filesize = filesize( get_attached_file( $curves['ID'] ) ); $filesize = size_format($filesize, 0); echo ' ~' . $filesize; ?>
- Displacements from 0.45 cm3/rev to 2.28 cm3/rev
- Maximum pressures up to 280 bar
- Rotation speeds up to 9000 rpm
- Inlet and outlet in the body, front flange or back cover
- Internal drain
- Available shafts:
- Parallel shaft with key
- Milled shaft
In the following tables you will find the most common versions of this product in STEP format. For other configurations please contact our technical office.