VIVOIL OLEODINAMICA VIVOLO

First Vivoil Cast Iron Flange and Cover Pumps

eugenio — Wed, 27 Jun 2012 12:29:53 +0000

Following our customer’s requests we introduced in our range a first cast iron flange and cover pump.
This solution improves the performance and life of the products, even for the lateral thickness of the body that we increased of some millimiters.

By now we have available the European standard Group 2 pump, single and multiple.

Gr. 2 Cast Iron Pumps

UNDER THE SNOW

eugenio — Wed, 01 Feb 2012 13:02:25 +0000

Under a lot of snow today, we apologize our office is partially closed.

We hope we will be able to assist you soon.

GROOT TECHNIEK – Holland

eugenio — Tue, 27 Dec 2011 14:55:14 +0000

In the over 40 year history of Groot Techniek BV, the technique has made a huge leap. Groot Techniek BV has properly responded to this leap and became one of the largest technical wholesalers of North Holland with approximately 50 employees. Only in their headquarters they have stock over 25,000 articles waiting on its customer. Fast, reliable delivery and quality are their priorities.

For almost three decades we are successfully cooperating with them and still we are growing in our partnership.

Headquarters
Winkelerzand 3
1731 LR Winkel
Holland
Tel: +31 (0)224 544444
Fax:+31 (0)224 544499

Branche
Galileistraat 39
1704 SE Heerhugowaard
Holland
Tel: +31 (0)72 5720000
Fax:+31 (0)72 5721000

Branche
Pascalstraat 25
1446 TH Purmerend
Holland
Tel: +31 (0)299 666333
Fax:+31 (0)299 666334

E-mail: info@groot.nl
www.groot.nl

USE OF FLOW DIVIDERS AS PRESSURE AMPLIFIERS

eugenio — Mon, 25 Jul 2011 12:49:23 +0000

A different use for the flow dividers is as pressure amplifier.

In the PDF below, we have prepared a short explanation on how it work and how to dimension the correct flow divider to reach the desired increase.

Pressure Amplifier

SEALINGS KITS

eugenio — Fri, 03 Jun 2011 07:00:03 +0000

We have created a simplified table where you should look at to ask for the correct sealing kit.

You have to check for the dimensional size (pump colour) and the connecting flange you have (the centering diameter) to be able to know the right sealing kit.
We have two different codes for the version on NBR or VITON material.

For the version with the OULET on the side of the shaft you have to require the specific kit.

Sealings Kits Table

3D CAD MODELS – GROUP 3 FLOW DIVIDERS

eugenio — Fri, 20 May 2011 09:25:43 +0000

Here below the last 3D models (STEP) for our flow divider (2 and 4 elements).

To download the model, click on the product code you are looking for.

CAD MODELS TABLE – GROUP 3 FLOW DIVIDERS
Rif.	Displ.	KV-3D – No Valve 2 Elements	KV-3D – No Valve 4 Elements
66	15 cc	9D0266	9D0466
68	18 cc	9D0268	9D0468
70	21 cc	9D0270	9D0470
72	27 cc	9D0272	9D0472
74	32 cc	9D0274	9D0474
78	38 cc	9D0278	9D0478
79	43 cc	9D0279	9D0479
80	47 cc	9D0280	9D0480
81	51 cc	9D0281	9D0481
82	54 cc	9D0282	9D0482
83	61 cc	9D0283	9D0483
85	64 cc	9D0285	9D0485
86	70 cc	9D0286	9D0486
87	74 cc	9D0287	9D0487
89	90 cc	9D0289	9D0489

3D CAD Models – Group 2 Flow Dividers

eugenio — Thu, 28 Apr 2011 14:58:39 +0000

Here below you will find the 3D models (STEP) for the group 2 most common flow dividers (2 and 4 elements).

To download the model, click on the product code you are looking for.

For the valve version, only the standard code is listed, but all the version has the same dimensions.

CAD MODELS TABLE – GROUP 2 FLOW DIVIDERS
Rif.	Displ.	RV-2D – No Valve 2 Elements	RV-2D – No Valve 4 Elements	RV-2V - with Valves 2 Elements	RV-2V – with Valves 4 Elements
41	4 cc	9RD0241	9RD0441	9RV02B41	9RV04B41
43	6 cc	9RD0243	9RD0443	9RV02B43	9RV04B43
45	9 cc	9RD0245	9RD0445	9RV02B45	9RV04B45
47	11 cc	9RD0247	9RD0447	9RV02B47	9RV04B47
49	14 cc	9RD0249	9RD0449	9RV02B49	9RV04B49
51	17 cc	9RD0251	9RD0451	9RV02B51	9RV04B51
53	19 cc	9RD0253	9RD0453	9RV02B53	9RV04B53
55	22 cc	9RD0255	9RD0455	9RV02B55	9RV04B55
57	26 cc	9RD0257	9RD0457	9RV02B57	9RV04B57
59	30 cc	9RD0259	9RD0459	9RV02B59	9RV04B59
61	34 cc	9RD0261	9RD0461	9RV02B61	9RV04B61
63	40 cc	9RD0263	9RD0463	9RV02B63	9RV04B63

HABERKORN – Austria

eugenio — Mon, 18 Apr 2011 06:00:41 +0000

Haberkorn Ulmer is Austria’s largest technical retailer. With 6 subsidiaries throughout the country, the company distributes a wide range of hydraulic components and fluid connectors.

In addition, hydraulics specialists are responsible for customized engineering solutions and the assembly of power packs.

For over 15 years, Haberkorn Ulmer has cooperated very closely with Vivoil in the fields of gear pumps and flow dividers.

Their logistics competence, large stock of Vivoil products and 24-hour shipment capability make Haberkorn Ulmer a competent partner to Austrian customers.

Haberkorn
Ulmer GmbH
6961 Wolfurt

Hohe Brücke
T +43 5574 / 695 – 0
F +43 5574 / 695 – 99
info.wolfurt@haberkorn.com

www.haberkorn.com

Germany – DAUNER

eugenio — Thu, 07 Apr 2011 14:45:19 +0000

One of our hystorical partners of our company is located in Germany:

Dauner Antriebstechnik GmbH
Industriestraße 3
96120 Bischberg-Trosdorf
Telefon +49 9503 50 00 80
Telefax +49 9503 50 00 84 9
info@dauner-antriebstechnik.de
www.dauner-antriebstechnik.de

They are specialists in hydraulic components and drive engineering. Their product range includes, for more than 30 years, products from many leading manufacturers. Customers appreciate the very good storage provisioning, the competitive prices and efficient collaboration.
They work as competent partner between the manufacturers and final customers providing sales, technical advices and the service to all the products.

FLOW DIVIDER Group 1 – 3D Models

eugenio — Fri, 01 Apr 2011 12:07:09 +0000

Here below the 3D models for group 1 flow divider (must common – 2 and 4 elements).
To download the STEP model, click on the icon of the product that you need.


		RV-1D		RV-1S		RV-1V
Code	Displacement	2 Elem.	4 Elem.	2 Elem.	4 Elem.	2 Elem.	4 Elem.
16	0.9
17	1.2
18	1.7
20	2.2
21	2.6
23	3.2
25	3.8
27	4.3
29	4.9
31	5.9
32	6.5
34	7.8
36	7.8